Thermal protection

Non-adhesive high bulk glass fibre tape withstands intense heat and flame and sheds molten splash immediately.

Outstanding molten splash protection

Pyrotape® is a knitted high bulk glass fibre tape, heavily coated with iron oxide red silicone rubber. This specially designed compound sheds molten metal splash immediately, so very little heat transfer occurs.

Pyrotape® can withstand repeated exposures to molten steel, molten aluminium and molten glass, up to 1650°C.

High temperature protection for hoses and cables

Pyrotape® withstands continuous exposure to 260°C, up to 1090°C for 15-20 minutes, and up to 1650°C for 15-30 seconds.

When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Non adhesive installation without line disconnection

Pyrotape® has an excellent modulus of elasticity and can wrap any diameter hose or cable - typically in a spiral wrap with a 50% overlap. Can be installed without disconnecting hoses or cables.

Silicone rubber high temperature tape forms a non-adhesive, self-bonding, self-curing, liquid-tight insulation barrier. High Temperature Insulation Tape ADL Insulflex Pyrosil™ is a non-adhesive, iron oxide red silicone rubber tape, designed to withstand continuous exposure to temperatures up to 246oC. Broad application range By virtue of its high dielectric strength, Pyrosil™ heat resistant tape is an excellent alternative to heat shrinkable tubing, vinyl tapes and wraps. Typical applications include: wrapping wiring harnesses; protecting splices and terminations of power cables; insulating coils on motors and generators. Pyrosil™ is also ideal for use as an end sealant in conjunction with Pyrojacket to prevent hydraulic oils and contaminants wicking into the inner braid. Reinforced extra-strength Pyrosil™ Tape also available Reinforced with sinusoidal glass fibre to provide higher tensile strength and resistance to notch sensitivity. Width 25mm.

Heat-reflective tape for radiant heat applications requiring high adhesion, abrasion protection, and a surface impervious to fluids and contaminants.

Tough durable heat-reflective adhesive tape

Fibreflect™ heat-reflective tape is constructed from a thin layer of aluminium foil heat-stable laminated to a texturized glass fbre base fabric on one side, with a pressure sensitive adhesive on the other to facilitate installation.

The durable construction of Fibreflect™ Tape is suitable for demanding applications up to 204°C continuous operating temperature. The glass fibre base fabric will stay intact up to 538°C.

Available in 51mm and 102mm widths in 45mtr rolls.

A low cost, convenient, field installable solution to some of the most demanding high temperature problems.

A health conscious alternative to Asbestos

ADL Insulflex Silicaflex™ Tape AB is a slit Silica tape constructed from 96% pure SiO2 fibres, coated one side with a pressure sensitive adhesive backing for easy installation. The adhesive decomposes at high temperatures, leaving a perfectly tape-wrapped hose, cable or pipe.

Designed for severe heat environments

Suitable for use at 982°C, and able to withstand short term exposure up to 1650°C, Silicaflex™ Tape AB sets the standard for flexibility and minimum lineal shrinkage under high heat conditions.

Durability is further enhanced with a proprietary hydrocarbon coating, giving Silicaflex™ Tape AB unmatched abrasion resistance and tensile strength.

Stock and custom sizes

Available in standard widths of 51mm and 102mm on 45mtr rolls. Custom widths are available by special order.